Show simple item record

dc.contributor.authorJun Cui
dc.contributor.authorZhirui Wang
dc.contributor.authorGordon K. Shek
dc.date.accessioned2017-05-09T00:35:04Z
dc.date.available2017-05-09T00:35:04Z
dc.date.copyrightAugust, 2009
dc.date.issued2009
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28515#041406_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/141777
dc.description.abstractA crack initiation and growth mechanism known as delayed hydride cracking (DHC) is a concern for Zr-2.5Nb alloy pressure tubes of CANada Deuterium Uranium or CANDU (CANDU is a trademark of the Atomic Energy of Canada Limited, Ontario, Canada) nuclear reactors. DHC is a repetitive process that involves hydrogen diffusion, hydride precipitation, formation, and fracture of a hydrided region at a flaw tip. An overload occurs when the flaw-tip hydrided region is loaded to a stress, higher than that at which this region is formed. For the fitness-for-service assessment of the pressure tubes, it is required to demonstrate that the overload from the normal reactor operating and transient loading conditions will not fracture the hydrided region, and will not initiate DHC. In this work, several series of systematically designed, monotonically increasing load experiments are performed on specimens, prepared from an unirradiated pressure tube with hydrided region, formed at flaws with a root radius of 0.1 mm or 0.3 mm, under different hydride formation stresses and thermal histories. Crack initiation in the overload tests is detected by the acoustic emission technique. Test results indicate that the resistance to overload fracture is dependent on a variety of parameters including hydride formation stress, thermal history, hydrogen concentration, and flaw geometry.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleOverload Fracture of Hydrided Region at Simulated Blunt Flaws in Zr-2.5Nb Pressure Tube Material
dc.typeJournal Paper
dc.journal.volume131
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3147743
dc.journal.fristpage41406
dc.identifier.eissn1528-8978
dc.keywordsPressure
dc.keywordsElectrical resistance
dc.keywordsFracture (Process)
dc.keywordsCycles
dc.keywordsStress
dc.keywordsZirconium AND Hydrogen
dc.treeJournal of Pressure Vessel Technology:;2009:;volume( 131 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record