Show simple item record

dc.contributor.authorMohsen Dadfarnia
dc.contributor.authorBrian P. Somerday
dc.contributor.authorPetros Sofronis
dc.contributor.authorIan M. Robertson
dc.contributor.authorDouglas Stalheim
dc.date.accessioned2017-05-09T00:35:03Z
dc.date.available2017-05-09T00:35:03Z
dc.date.copyrightAugust, 2009
dc.date.issued2009
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28515#041404_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/141775
dc.description.abstractThe technology of large scale hydrogen transmission from central production facilities to refueling stations and stationary power sites is at present undeveloped. Among the problems that confront the implementation of this technology is the deleterious effect of hydrogen on structural material properties, in particular, at gas pressures of the order of 15MPa, which are the suggested magnitudes by economic studies for efficient transport. In order to understand the hydrogen embrittlement conditions of the pipeline materials, we simulate hydrogen diffusion through the surfaces of an axial crack on the internal wall of a vessel coupled with material deformation under plane strain small scale yielding conditions. The calculation of the hydrogen accumulation ahead of the crack tip accounts for stress-driven transient diffusion of hydrogen and trapping at microstructural defects whose density evolves dynamically with deformation. The results are analyzed to correlate for a given material system the time after which hydrogen transport takes place under steady state conditions with the level of load in terms of the applied stress intensity factor at the crack tip and the size of the domain used for the simulation of the diffusion.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleInteraction of Hydrogen Transport and Material Elastoplasticity in Pipeline Steels
dc.typeJournal Paper
dc.journal.volume131
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3027497
dc.journal.fristpage41404
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2009:;volume( 131 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record