| dc.contributor.author | In-Cheol Chu | |
| dc.contributor.author | Heung June Chung | |
| dc.contributor.author | Chang Hee Lee | |
| dc.date.accessioned | 2017-05-09T00:35:03Z | |
| dc.date.available | 2017-05-09T00:35:03Z | |
| dc.date.copyright | August, 2009 | |
| dc.date.issued | 2009 | |
| dc.identifier.issn | 0094-9930 | |
| dc.identifier.other | JPVTAS-28515#041301_1.pdf | |
| dc.identifier.uri | http://yetl.yabesh.ir/yetl/handle/yetl/141770 | |
| dc.description.abstract | Fluid-elastic instability characteristics of a U-tube bundle were experimentally investigated in air-water two-phase flow. A total of 39 U-tubes were arranged in a rotated square array with a pitch-to-diameter ratio of 1.633. Vibration responses of four U-tubes were measured with three-axis accelerometers. Two sets of experiments were performed to investigate the onset of fluid-elastic instability, and the damping and hydrodynamic mass of the U-tube. The experiments were performed for a void fraction of 70–95%. Fluid-elastic instability was clearly observed in an out-of-plane mode vibration. The effect of a primary side flow on the vibration of U-tube was investigated separately. The damping ratio of the present U-tube was higher than the damping ratio of the cantilever tubes in the literature. The hydrodynamic mass of the U-tube was generally in accordance with the hydrodynamic mass of the cantilever tubes in the literature. The instability constant (K) of the Connors equation was assessed with a simplified effective gap velocity, and the fluid-elastic instability constant was 8.5. | |
| dc.publisher | The American Society of Mechanical Engineers (ASME) | |
| dc.title | Fluid-Elastic Instability of Rotated Square Array U-Tubes in Air-Water Flow | |
| dc.type | Journal Paper | |
| dc.journal.volume | 131 | |
| dc.journal.issue | 4 | |
| dc.journal.title | Journal of Pressure Vessel Technology | |
| dc.identifier.doi | 10.1115/1.3148187 | |
| dc.journal.fristpage | 41301 | |
| dc.identifier.eissn | 1528-8978 | |
| dc.tree | Journal of Pressure Vessel Technology:;2009:;volume( 131 ):;issue: 004 | |
| dc.contenttype | Fulltext | |