Show simple item record

dc.contributor.authorDan Vlaicu
dc.date.accessioned2017-05-09T00:35:02Z
dc.date.available2017-05-09T00:35:02Z
dc.date.copyrightAugust, 2009
dc.date.issued2009
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28515#041203_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/141766
dc.description.abstractThis paper presents the nonlinear shakedown analysis using finite element method for piping bends taking into account the maximum ovality tolerance. The resulting strain state of the stabilized cycle for the pipe bend including the maximum ovality tolerance is compared with the strain state for the perfectly round pipe bend. The boundary between shakedown and ratcheting is presented through global and local criteria in terms of displacements, and the Bree diagram (1989, “Plastic Deformation of a Closed Tube Due to Interaction of Pressure Stresses and Cyclic Thermal Stress,” Int. J. Mech. Sci., 31(11/12), pp. 865–892) converted into the interaction diagram is used to correlate the results of the nonlinear cyclic analyses and ASME Code limits for primary and secondary loads. This paper also discusses the choice of the global shakedown linked with the axial strain and the local through-thickness shakedown associated with the hoop strain. Furthermore, a simple fatigue calculation is conducted to illustrate the difference between pipe bends with perfectly round cross section and pipe bends with initial ovality under similar boundary conditions.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThe Influence of the Initial Ovality Tolerance on the Nonlinear Cycling Analysis of Piping Bends
dc.typeJournal Paper
dc.journal.volume131
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3147983
dc.journal.fristpage41203
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2009:;volume( 131 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record