Show simple item record

dc.contributor.authorChihdar Yang
dc.contributor.authorZhidong Guan
dc.date.accessioned2017-05-09T00:35:01Z
dc.date.available2017-05-09T00:35:01Z
dc.date.copyrightOctober, 2009
dc.date.issued2009
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28518#051210_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/141752
dc.description.abstractAn analytical model was developed using the first-order laminated shell theory to determine stress and strain distributions within a composite pipe joint under combined torsional and tensile loading. Due to the axisymmetric nature of torsional and tensile loads about the pipe’s central axis, a one-dimensional model was sufficient to simulate the system response. In this developed model, a three-component joint system consisting of coupling, adhesive, and pipe was used to model different types of composite pipe joints, such as adhesive-bonded socket joints, butt-and-strap joints, and heat-activated coupling joints. Good correlations were found when comparing results from both the developed model and the finite element model, including adhesive peel stress and shear stress distributions.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleStress Analysis of Composite Pipe Joints Under Combined Torsional and Tensile Loading
dc.typeJournal Paper
dc.journal.volume131
dc.journal.issue5
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3151810
dc.journal.fristpage51210
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2009:;volume( 131 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record