Show simple item record

dc.contributor.authorGuillermo Ramirez
dc.contributor.authorMichael D. Engelhardt
dc.date.accessioned2017-05-09T00:35:01Z
dc.date.available2017-05-09T00:35:01Z
dc.date.copyrightOctober, 2009
dc.date.issued2009
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28518#051205_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/141747
dc.description.abstractA collapse pressure test was conducted on a full-scale diameter prototype composite offshore drilling riser. The test specimen was a carbon fiber-epoxy filament-wound tube, approximately 56.4 cm outside diameter and 3.05 cm wall thickness. The tube was subjected to external water pressure up to collapse. The purpose of the test was to confirm the external pressure capacity of the specimen and to provide a basis for verification and calibration of analytical estimates of the collapse pressure of large scale carbon fiber tubes. The specimen was instrumented with strain gauges on both the outside and inside walls of the tube. This paper describes the test specimen and presents key results of the test.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleExperimental Investigation of a Large-Scale Composite Riser Tube Under External Pressure
dc.typeJournal Paper
dc.journal.volume131
dc.journal.issue5
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3122773
dc.journal.fristpage51205
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2009:;volume( 131 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record