Show simple item record

dc.contributor.authorJ. Fang
dc.contributor.authorN. Li
dc.contributor.authorZ. F. Sang
dc.contributor.authorG. E. Widera
dc.date.accessioned2017-05-09T00:35:00Z
dc.date.available2017-05-09T00:35:00Z
dc.date.copyrightOctober, 2009
dc.date.issued2009
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28518#051202_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/141743
dc.description.abstractThe objective of this paper is to investigate the elastic strength of cylindrical vessels with hillside nozzle under out-of-plane moment on the nozzle. A total of 5 model vessels with different hillside nozzle angles and loading directions were fabricated for study by experimental and finite element numerical simulation methods. The results indicate that an obvious stress concentration exists at the intersection area between vessel and nozzle. The maximum elastic stress occurs at the inside corner of the nozzle-cylinder intersection in transverse section of the cylinders. The dominant stress is the circumferential stress in the cylindrical vessels. The maximum elastic stress and the stress ratio decrease with an increase in the hillside nozzle angle and so does the nozzle displacement.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleStudy of Elastic Strength for Cylinders With Hillside Nozzle
dc.typeJournal Paper
dc.journal.volume131
dc.journal.issue5
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3148085
dc.journal.fristpage51202
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2009:;volume( 131 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record