Show simple item record

dc.contributor.authorM. Turski
dc.contributor.authorM. C. Smith
dc.contributor.authorP. J. Bouchard
dc.contributor.authorP. J. Withers
dc.contributor.authorL. Edwards
dc.date.accessioned2017-05-09T00:35:00Z
dc.date.available2017-05-09T00:35:00Z
dc.date.copyrightDecember, 2009
dc.date.issued2009
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28522#061406_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/141736
dc.description.abstractApplication of electronic speckle pattern interferometry (ESPI) is described to measure the spatial variation in monotonic tensile stress-strain properties along “cross-weld” specimens machined from a stainless steel three-pass welded plate. The technique, which could also be done with digital image correlation, was applied to quantify how the material 0.2%, 1%, 2%, 5%, 10%, and 20% proof stress varied with distance from the center-line of the weldment for parent and weld material associated with the first and final passes. The stress-strain curves measured by the ESPI method correlated closely with stress-strain data measured using conventional test specimens. The measured results are consistent with the hypothesis that thermo-mechanical cycles associated with the welding process work harden previously deposited (single-pass) weld metal and the surrounding parent material. The stress-strain response of the heat affected zone adjacent to the first weld pass is consistent with an accumulated (equivalent monotonic) plastic strain of 6.5% and that of the first pass weld bead was consistent with an accumulated plastic strain of approximately 4% greater than the state of the final pass weld metal.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleSpatially Resolved Materials Property Data From a Uniaxial Cross-Weld Tensile Test
dc.typeJournal Paper
dc.journal.volume131
dc.journal.issue6
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4000196
dc.journal.fristpage61406
dc.identifier.eissn1528-8978
dc.keywordsWelding
dc.keywordsStress-strain curves
dc.keywordsStress
dc.keywordsCycles
dc.keywordsDisplacement
dc.keywordsElectronic speckle pattern interferometry
dc.keywordsMetals
dc.keywordsProject tasks
dc.keywordsMaterials properties
dc.keywordsStainless steel
dc.keywordsHeat
dc.keywordsMeasurement AND Phase (Wave motion)
dc.treeJournal of Pressure Vessel Technology:;2009:;volume( 131 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record