Show simple item record

dc.contributor.authorD. Sugumar
dc.contributor.authorKek-Kiong Tio
dc.date.accessioned2017-05-09T00:33:58Z
dc.date.available2017-05-09T00:33:58Z
dc.date.copyrightJanuary, 2009
dc.date.issued2009
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27853#012401_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/141151
dc.description.abstractThe effects of the thermophysical properties of the working fluid on the performance of a microheat pipe of triangular cross section are investigated. For this purpose, five different working fluids are selected: water, hepthane, ammonia, methanol, and ethanol. For operating temperatures ranging from 20°Cto100°C, it is found that the behavior of the heat transport capacity is dominated by a property of the working fluid, which is equal to the ratio of the surface tension and dynamic viscosity σ∕μl. This property has the same dimension as velocity and can be interpreted as a measure of the working fluid’s rate of circulation, which can be provided by capillarity after overcoming the effect of viscosity. Of the five working fluids selected, ammonia is preferable for operating temperatures below 50°C since it yields the highest heat transport capacity; however, water is the preferred working fluid for temperatures above 50°C.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThe Effects of Working Fluid on the Heat Transport Capacity of a Microheat Pipe
dc.typeJournal Paper
dc.journal.volume131
dc.journal.issue1
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.2977547
dc.journal.fristpage12401
dc.identifier.eissn1528-8943
dc.keywordsHeat
dc.keywordsFluids
dc.keywordsPipes
dc.keywordsOperating temperature AND Water
dc.treeJournal of Heat Transfer:;2009:;volume( 131 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record