Show simple item record

dc.contributor.authorMatt Goodro
dc.contributor.authorJongmyung Park
dc.contributor.authorPhil Ligrani
dc.contributor.authorMike Fox
dc.contributor.authorHee-Koo Moon
dc.date.accessioned2017-05-09T00:33:58Z
dc.date.available2017-05-09T00:33:58Z
dc.date.copyrightJanuary, 2009
dc.date.issued2009
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27853#012201_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/141150
dc.description.abstractThis paper consider the effects of temperature ratio on the heat transfer from an array of jets impinging on a flat plate. At a constant Reynolds number of 18,000 and a constant Mach number of 0.2, different ratios of target plate temperature to jet temperature are employed. The spacing between holes in the streamwise direction X is 8D, and the spanwise spacing between holes in a given streamwise row Y is also 8D. The target plate is located 3D away from the impingement hole exits. Experimental results show that local, line-averaged, and spatially averaged Nusselt numbers decrease as the Twa∕Tj temperature ratio increases. This is believed to be due to the effects of temperature-dependent fluid properties, as they affect local and global turbulent transport in the flow field created by the array of impinging jets. The effect of temperature ratio on crossflow-to-jet mass velocity ratio and discharge coefficients is also examined.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEffect of Temperature Ratio on Jet Array Impingement Heat Transfer
dc.typeJournal Paper
dc.journal.volume131
dc.journal.issue1
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.2977546
dc.journal.fristpage12201
dc.identifier.eissn1528-8943
dc.keywordsFlow (Dynamics)
dc.keywordsTemperature
dc.keywordsHeat transfer AND Jets
dc.treeJournal of Heat Transfer:;2009:;volume( 131 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record