Show simple item record

dc.contributor.authorKoichi Ichimiya
dc.contributor.authorYutaka Yoshida
dc.date.accessioned2017-05-09T00:33:57Z
dc.date.available2017-05-09T00:33:57Z
dc.date.copyrightJanuary, 2009
dc.date.issued2009
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27853#011701_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/141146
dc.description.abstractThis paper describes the oscillation effect of impingement surface on two-dimensional impingement heat transfer with confined wall. The local temperature distribution on an impingement surface was measured using a thermosensitive liquid crystal sheet and an image processor. Experiments were conducted by using air as a working fluid. Experimental conditions were as follows: Reynolds number Re=1000–10,000, dimensionless distance between nozzle and impingement surface h∕B=1.0–4.0, frequency f=0–100Hz, and amplitudes a=0.5mm and 1.0mm. The local Nusselt number was improved for the comparatively low Reynolds number and low frequency and was depressed for high frequency. In the case of heat transfer enhancement, vortices on the impingement surface were renewed frequently, and on the other hand, in the case of heat transfer depression, thermal boundary layer thickness increased in appearance by the vibration of the impingement surface.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleOscillation Effect of Impingement Surface on Two-Dimensional Impingement Heat Transfer
dc.typeJournal Paper
dc.journal.volume131
dc.journal.issue1
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.2955474
dc.journal.fristpage11701
dc.identifier.eissn1528-8943
dc.keywordsOscillations
dc.keywordsFlow (Dynamics)
dc.keywordsHeat transfer
dc.keywordsNozzles AND Reynolds number
dc.treeJournal of Heat Transfer:;2009:;volume( 131 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record