Show simple item record

dc.contributor.authorM. J. Schertzer
dc.contributor.authorJ. S. Chang
dc.contributor.authorD. Ewing
dc.contributor.authorC. Y. Ching
dc.date.accessioned2017-05-09T00:33:57Z
dc.date.available2017-05-09T00:33:57Z
dc.date.copyrightJanuary, 2009
dc.date.issued2009
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27853#011501_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/141140
dc.description.abstractAn investigation was performed to examine the effect that the pore size in a porous plate had on the heat transfer between a heated finned surface and a saturated porous plate at different gap distances between the surfaces. Experiments were performed for a porous plate with a nominal pore size of 50μm and the results were compared with previous results for a pore size of 200μm (, 2006, “ The Effect of Gap Distance on the Heat Transfer Performance Between a Finned Surface and a Saturated Porous Plate,” Int. J. Heat. Mass Transfer, 4, pp. 4200–4208). The plate with the smaller pore size performed better at small and intermediate gaps but not at large gaps. The maximum heat transfer coefficient was similar for both plates when compared in terms of the ratio between the gap distance and the pore size. However, the temperature distributions on the heated foil and their evolution with heat flux were dissimilar when compared in terms of the gap distance or the gap to pore ratio, suggesting that the boiling dynamics within the gap does not scale with either parameters.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThe Effect of Pore Size on the Heat Transfer Between a Heated Finned Surface and a Saturated Porous Plate
dc.typeJournal Paper
dc.journal.volume131
dc.journal.issue1
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.2977595
dc.journal.fristpage11501
dc.identifier.eissn1528-8943
dc.keywordsDynamics (Mechanics)
dc.keywordsHeat
dc.keywordsTemperature
dc.keywordsHeat transfer
dc.keywordsBoiling
dc.keywordsPlates (structures)
dc.keywordsTemperature distribution
dc.keywordsHeat flux
dc.keywordsHeat transfer coefficients
dc.keywordsVapors AND Flux (Metallurgy)
dc.treeJournal of Heat Transfer:;2009:;volume( 131 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record