Show simple item record

dc.contributor.authorKoichi Ichimiya
dc.contributor.authorTakuya Uemura
dc.contributor.authorTetsuya Norikuni
dc.contributor.authorTetsuaki Takeda
dc.date.accessioned2017-05-09T00:33:56Z
dc.date.available2017-05-09T00:33:56Z
dc.date.copyrightFebruary, 2009
dc.date.issued2009
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27855#024503_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/141135
dc.description.abstractThis paper describes the heat transfer and flow characteristics of a heat exchanger tube filled with a high porous material. Fine copper wires (diameter: 0.5 mm) were inserted in a circular tube dominated by thermal conduction and forced convection. The porosity was from 0.98 to 1.0. The working fluid was air. The hydraulic equivalent diameter was cited as the characteristic length in the Nusselt number and the Reynolds number. The Nusselt number and the friction factor were expressed as functions of the Reynolds number and porosity. The thermal performance was evaluated by the ratio of the Nusselt number with and without a high porous material and the entropy generation. It was recognized that the high porous material was effective in low Reynolds numbers and the Reynolds number, which minimized the entropy generation existed.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEffects of a High Porous Material on Heat Transfer and Flow in a Circular Tube
dc.typeJournal Paper
dc.journal.volume131
dc.journal.issue2
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.2994713
dc.journal.fristpage24503
dc.identifier.eissn1528-8943
dc.keywordsFlow (Dynamics)
dc.keywordsHeat transfer
dc.keywordsPorous materials
dc.keywordsPorosity
dc.keywordsReynolds number
dc.keywordsFriction
dc.keywordsWire AND Copper
dc.treeJournal of Heat Transfer:;2009:;volume( 131 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record