Show simple item record

dc.contributor.authorE. Assis
dc.contributor.authorG. Ziskind
dc.contributor.authorR. Letan
dc.date.accessioned2017-05-09T00:33:56Z
dc.date.available2017-05-09T00:33:56Z
dc.date.copyrightFebruary, 2009
dc.date.issued2009
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27855#024502_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/141134
dc.description.abstractThe present study explores numerically and experimentally the process of a phase-change material (PCM) solidification in a spherical shell. At the initial state, the PCM liquid occupies 98.5% of the shell. The upper segment of 1.5% contains air, which flows in as the solidification progresses. In the experiments, a commercially available paraffin wax is used. Its properties are engaged in the numerical simulations. The investigation is performed for solidification in spherical shells of 20 mm, 40 mm, 60 mm, and 80 mm in diameter at the wall uniform temperature, which varied from 10°C to 40°C below the mean solidification temperature of the phase-change material. Transient numerical simulations are performed using the FLUENT 6.2 software and incorporate such phenomena as flow in the liquid phase, volumetric shrinkage due to solidification, and irregular boundary between the PCM and air. The numerical model is validated versus the experimental results. Shrinkage patterns and void formation are demonstrated. Dimensional analysis of the results is performed and presented as the PCM melt fractions versus the product of the Fourier and Stefan numbers. This analysis leads to a generalization that encompasses the cases considered herein.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleNumerical and Experimental Study of Solidification in a Spherical Shell
dc.typeJournal Paper
dc.journal.volume131
dc.journal.issue2
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.2993543
dc.journal.fristpage24502
dc.identifier.eissn1528-8943
dc.keywordsSolidification
dc.keywordsShells
dc.keywordsSpherical shells
dc.keywordsShrinkage (Materials) AND Computer simulation
dc.treeJournal of Heat Transfer:;2009:;volume( 131 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record