Show simple item record

dc.contributor.authorCarlos Silva
dc.contributor.authorDoseo Park
dc.contributor.authorEgidio (Ed) Marotta
dc.contributor.authorLeroy (Skip) Fletcher
dc.date.accessioned2017-05-09T00:33:55Z
dc.date.available2017-05-09T00:33:55Z
dc.date.copyrightFebruary, 2009
dc.date.issued2009
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27855#021702_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/141120
dc.description.abstractThe effect of the dimple shape and orientation on the heat transfer coefficient of a vertical fin surface was determined both numerically and experimentally. The investigation focused on the laminar channel flow between fins, with a Re=500 and 1000. Numerical simulations were performed using a commercial computational fluid dynamics code to analyze optimum configurations, and then an experimental investigation was conducted on flat and dimpled surfaces for comparison purposes. Numerical results indicated that oval dimples with their “long” axis oriented perpendicular to the direction of the flow offered the best thermal improvement, hence the overall Nusselt number increased up to 10.6% for the dimpled surface. Experimental work confirmed these results with a wall-averaged temperature reduction of up to 3.7K, which depended on the heat load and the Reynolds number. Pressure losses due to the dimple patterning were also briefly explored numerically in this work.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleOptimization of Fin Performance in a Laminar Channel Flow Through Dimpled Surfaces
dc.typeJournal Paper
dc.journal.volume131
dc.journal.issue2
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.2994712
dc.journal.fristpage21702
dc.identifier.eissn1528-8943
dc.keywordsPressure
dc.keywordsFlow (Dynamics)
dc.keywordsTemperature
dc.keywordsHeat transfer
dc.keywordsChannels (Hydraulic engineering)
dc.keywordsComputer simulation
dc.keywordsReynolds number
dc.keywordsChannel flow
dc.keywordsHeat transfer coefficients
dc.keywordsFriction
dc.keywordsPlates (structures)
dc.keywordsOptimization
dc.keywordsGeometry
dc.keywordsUncertainty
dc.keywordsHeat
dc.keywordsFluids AND Turbulence
dc.treeJournal of Heat Transfer:;2009:;volume( 131 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record