Show simple item record

dc.contributor.authorSung Joong Kim
dc.contributor.authorTom McKrell
dc.contributor.authorJacopo Buongiorno
dc.contributor.authorLin-Wen Hu
dc.date.accessioned2017-05-09T00:33:52Z
dc.date.available2017-05-09T00:33:52Z
dc.date.copyrightApril, 2009
dc.date.issued2009
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27859#043204_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/141090
dc.description.abstractIt is shown that addition of alumina, zinc-oxide, and diamond particles can enhance the critical heat flux (CHF) limit of water in flow boiling. The particles used here were in the nanometer range (<100 nm) and at low concentration (≤0.1 vol %). The CHF tests were conducted at 0.1 MPa and at three different mass fluxes (1500 kg/m2 s, 2000 kg/m2 s, and 2500 kg/m2 s). The thermal conditions at CHF were subcooled. The maximum CHF enhancement was 53%, 53%, and 38% for alumina, zinc oxide, and diamond, respectively, always obtained at the highest mass flux. A postmortem analysis of the boiling surface reveals that its morphology is altered by deposition of the particles during boiling. Additionally, the wettability of the surface is substantially increased, which seems to correlate well with the observed CHF enhancement.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleExperimental Study of Flow Critical Heat Flux in Alumina-Water, Zinc-Oxide-Water, and Diamond-Water Nanofluids
dc.typeJournal Paper
dc.journal.volume131
dc.journal.issue4
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.3072924
dc.journal.fristpage43204
dc.identifier.eissn1528-8943
dc.keywordsDiamonds
dc.keywordsNanofluids
dc.keywordsWater
dc.keywordsCritical heat flux
dc.keywordsFlow (Dynamics)
dc.keywordsBoiling AND Nanoparticles
dc.treeJournal of Heat Transfer:;2009:;volume( 131 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record