Show simple item record

dc.contributor.authorM. H. M. Grooten
dc.contributor.authorC. W. M. van der Geld
dc.date.accessioned2017-05-09T00:33:50Z
dc.date.available2017-05-09T00:33:50Z
dc.date.copyrightMay, 2009
dc.date.issued2009
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27860#051501_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/141066
dc.description.abstractWhen traditional air-to-air cooling is too voluminous, heat exchangers with long thermosyphons offer a good alternative. Experiments with a single thermosyphon with a large length-to-diameter ratio (188) and filled with R-134a are presented and analyzed. Saturation temperatures, filling ratios, and angles of inclination have been varied in wide ranges. A higher sensitivity of evaporation heat transfer coefficients on reduced pressure than in previous work has been found. Measurements revealed the effect of pressure or the saturation temperature on condensation heat transfer. The condensate film Reynolds number that marks a transition from one condensation heat transfer regime to another is found to depend on pressure. This effect was not accounted for by correlations from the literature. New correlations are presented to predict condensation and evaporation heat transfer rates.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titlePredicting Heat Transfer in Long R-134a Filled Thermosyphons
dc.typeJournal Paper
dc.journal.volume131
dc.journal.issue5
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.3000969
dc.journal.fristpage51501
dc.identifier.eissn1528-8943
dc.keywordsTemperature
dc.keywordsCondensation
dc.keywordsHeat transfer
dc.keywordsHeat transfer coefficients
dc.keywordsCondensers (steam plant) AND Evaporation
dc.treeJournal of Heat Transfer:;2009:;volume( 131 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record