Show simple item record

dc.contributor.authorJ. P. Calame
dc.contributor.authorR. E. Myers
dc.contributor.authorP. N. Safier
dc.contributor.authorD. Park
dc.contributor.authorR. Bass
dc.date.accessioned2017-05-09T00:33:50Z
dc.date.available2017-05-09T00:33:50Z
dc.date.copyrightMay, 2009
dc.date.issued2009
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27860#051401_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/141065
dc.description.abstractThe removal of high heat fluxes from BeO ceramic and GaN-on-SiC semiconductor dies using hierarchically branched-microchannel coolers is investigated, in order to examine the impact of the number of branching levels on performance. The microchannel coolers are made by lithography and deep reactive ion etching of single crystal silicon. The test dies contain a dc-operated resistive zone that approximates the spatially averaged heat flux that would appear in low-temperature cofired ceramic microwave circuit packages and in monolithic microwave integrated circuits. For the particular geometric constraints selected for the study (three source/exhaust channels, ∼5×5 mm2 die footprint, 200 μm deep channels in a 400 μm thick silicon wafer), the optimum performance is achieved with three hierarchical levels of branched-channel size. A heat flux of 1.5 kW/cm2 is removed from the 3.6×4.7 mm2 resistive zone of the BeO-based die, at a surface temperature of 203°C. When attached instead to a high thermal conductivity GaN-on-SiC die with a 1.2×5 mm2 resistive zone, a heat flux of 3.9 kW/cm2 is removed from the resistive zone at 198°C surface temperature. The total water flow rate is 275 ml/min in both situations. The experimental results are found to be in reasonable agreement with finite element simulations based on idealized estimates of convection coefficients within the channels. For the three-channel size configuration, an effective heat transfer coefficient in the range of 12.2–13.4 W/cm2 K (with respect to a 20°C bulk fluid temperature) is inferred to be present on the top of the microchannel cooler, based on simulations and derived values obtained from the experimental data.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleInvestigation of Hierarchically Branched-Microchannel Coolers Fabricated by Deep Reactive Ion Etching for Electronics Cooling Applications
dc.typeJournal Paper
dc.journal.volume131
dc.journal.issue5
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.3001017
dc.journal.fristpage51401
dc.identifier.eissn1528-8943
dc.keywordsHeat
dc.keywordsTemperature
dc.keywordsChannels (Hydraulic engineering)
dc.keywordsEngineering simulation
dc.keywordsSilicon
dc.keywordsMicrochannels
dc.keywordsHeat transfer coefficients
dc.keywordsCoolers
dc.keywordsEtching
dc.keywordsFlow (Dynamics)
dc.keywordsHeat flux
dc.keywordsBifurcation
dc.keywordsGallium nitride
dc.keywordsThermal conductivity
dc.keywordsFlux (Metallurgy) AND Fluids
dc.treeJournal of Heat Transfer:;2009:;volume( 131 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record