Show simple item record

dc.contributor.authorV. Yadav
dc.contributor.authorK. Kant
dc.contributor.authorC. G. Moon
dc.date.accessioned2017-05-09T00:33:48Z
dc.date.available2017-05-09T00:33:48Z
dc.date.copyrightJune, 2009
dc.date.issued2009
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27862#062301_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/141050
dc.description.abstractMethodology for predicting frost growth trends on a subcooled cylindrical surface is developed and implemented for multitube array configuration. Extension of conventional analysis and a novel technique for understanding frost formation phenomenon on the cylindrical surfaces is proposed; later one takes into account the nonsteady temperature field, which affects the density and thermal conductivity at a local level in the growing frost mass, for more accurate prediction of thermal resistance. The influence of migration of liquid water due to tortuosity effect is also considered. The results due to new model are found to be in good agreement with the data in the open literature. Data for frost thickness ratio (FTR) versus time for a section of array with four (tube) rows in the airstream are presented and thoroughly analyzed. The trends of FTR noted are complex and considerably dependent on the tube location, temperature of subcooled surface (Ts), airflow velocity (Ua), and the relative humidity (RHa) values. Approximate ranges for important parameters are −30≤Ts≤−5.0°C, 1.0≤Ua≤5.0 m/s, and 0.20≤RHa≤0.80. Presented analysis and the results are valuable in order to predict probable locations and precursors to partial or complete choking of airflow passages due to frost deposition in the evaporator coils.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleModeling Frost Growth for Subcooled Tube-Array Configurations
dc.typeJournal Paper
dc.journal.volume131
dc.journal.issue6
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.3082424
dc.journal.fristpage62301
dc.identifier.eissn1528-8943
dc.keywordsDensity
dc.keywordsTemperature
dc.keywordsThermal conductivity
dc.keywordsModeling
dc.keywordsSubcooling
dc.keywordsThermal resistance
dc.keywordsThickness
dc.keywordsAir flow
dc.keywordsFlow (Dynamics)
dc.keywordsHeat AND Water
dc.treeJournal of Heat Transfer:;2009:;volume( 131 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record