Show simple item record

dc.contributor.authorM. Gigliotti
dc.contributor.authorD. Tescione
dc.contributor.authorR. Gardi
dc.contributor.authorM. Ferraiuolo
dc.contributor.authorA. Riccio
dc.contributor.authorG. Marino
dc.date.accessioned2017-05-09T00:33:45Z
dc.date.available2017-05-09T00:33:45Z
dc.date.copyrightJuly, 2009
dc.date.issued2009
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27865#071701_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/141024
dc.description.abstractWithin the framework of the European Experimental Re-entry Test Bed (EXPERT) Program, aimed at improving the understanding of physical phenomena occurring during the return of space vehicles from space to earth, the design of a flying winged experimental payload has been performed in order to assess the thermomechanical behavior and resistance of ultrahigh temperature ceramics (UHTC) in real flight aerothermal environment. The EXPERT flying winglet article is intended to reproduce such conditions. Particular interest covers the design of the interfaces between the UHTC winglet and the EXPERT capsule thermal protection systems since thermal stresses arise during the re-entry phase. The fixation of the winglet to the capsule is achieved by means of dedicated bolts that must tolerate mechanical loads occurring at the first stages of the flight, that is, lift-off, ascent, and separation stages. The thermostructural design is performed by employing ANSYS /Workbench finite element commercial code; simulations take into account transient thermostructural loading conditions, the elastic-fragile behavior of the ceramic materials, and the temperature dependent elastic-plastic behavior of the capsule thermal protection systems. In the postprocessing phase, UHTC critical areas have been identified by following two different approaches. The first approach is deterministic and consists in applying a maximum stress criterion, the stress at a node is compared with the temperature dependent strength at that node. The second approach, which is commonly employed for elastic-fragile materials, is probabilistic and consists in applying a Weibull-like failure criterion. Thermal and structural analyses simulating the re-entry phase have demonstrated that the maximum stresses and temperatures evaluated do not exceed their corresponding limits. Then, a configuration respecting all the requirements of the design has been identified, and its thermal and mechanical performances are discussed in detail.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThermostructural Design of a Flying Winglet Experimental Structure for the EXPERT Re-entry Test
dc.typeJournal Paper
dc.journal.volume131
dc.journal.issue7
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.3109242
dc.journal.fristpage71701
dc.identifier.eissn1528-8943
dc.keywordsCeramics
dc.keywordsStress
dc.keywordsTemperature
dc.keywordsDesign
dc.keywordsThermal stresses
dc.keywordsFailure
dc.keywordsHeat flux
dc.keywordsFinite element analysis
dc.keywordsFlight
dc.keywordsStructural analysis AND Computational fluid dynamics
dc.treeJournal of Heat Transfer:;2009:;volume( 131 ):;issue: 007
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record