Show simple item record

dc.contributor.authorVanessa Egan
dc.contributor.authorJason Stafford
dc.contributor.authorPat Walsh
dc.contributor.authorEd Walsh
dc.date.accessioned2017-05-09T00:33:45Z
dc.date.available2017-05-09T00:33:45Z
dc.date.copyrightJuly, 2009
dc.date.issued2009
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27865#071402_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/141020
dc.description.abstractAn experimental study is performed on one of the smallest commercially available miniature fans, suitable for cooling portable electronic devices, used in conjunction with both finned and finless heat sinks of equal exterior dimensions. The maximum overall footprint area of the cooling solution is 534mm2 with a profile height of 5 mm. Previous analysis has shown that due to fan exit angle, flow does not enter the heat sinks parallel to the fins or bounding walls. This results in a nonuniform flow rate within the channels of the finned and finless heat sinks along with impingement of the flow at the entrance giving rise to large entrance pressure losses. In this paper straightening diffusers were attached at the exit of the fan, which resulted in aligning the flow entering the heat sinks with the fins and channel walls. Detailed velocity measurements were obtained using particle image velocimetry, which provided a further insight into the physics of the flow in such miniature geometries and in designing the straightening diffusers. The thermal analysis results indicate that the cooling power of the solution is increased by up to 20% through the introduction of a diffuser, hence demonstrating the need for integrated fan and heat sink design of low profile applications.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAn Experimental Study on the Design of Miniature Heat Sinks for Forced Convection Air Cooling
dc.typeJournal Paper
dc.journal.volume131
dc.journal.issue7
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.3110005
dc.journal.fristpage71402
dc.identifier.eissn1528-8943
dc.keywordsFlow (Dynamics)
dc.keywordsCooling
dc.keywordsDiffusers
dc.keywordsDesign
dc.keywordsHeat sinks
dc.keywordsForced convection
dc.keywordsThermal resistance AND Velocity measurement
dc.treeJournal of Heat Transfer:;2009:;volume( 131 ):;issue: 007
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record