Show simple item record

dc.contributor.authorEhsan Roohi
dc.contributor.authorMasoud Darbandi
dc.contributor.authorVahid Mirjalili
dc.date.accessioned2017-05-09T00:33:38Z
dc.date.available2017-05-09T00:33:38Z
dc.date.copyrightSeptember, 2009
dc.date.issued2009
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27870#092402_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/140983
dc.description.abstractWe use a direct simulation Monte Carlo (DSMC) method to simulate gas heating/cooling and choked subsonic flows in micro/nanoscale channels subject to either constant wall temperature or constant/variable heat flux boundary conditions. We show the effects of applying various boundary conditions on the mass flow rate and the flow parameters. We also show that it is necessary to add a buffer zone at the end of the channel if we wish to simulate more realistic conditions at the channel outlet. We also discuss why applying equilibrium-based Maxwellian distribution on molecules coming from the channel outlet, where the flow is nonequilibrium, will not disturb the DSMC solution. The current velocity, pressure, and mass flow rate results are compared with different analytical solutions of the Navier–Stokes equations. Although there are good agreements between the DSMC results and the analytical solutions in low compressible flow, the analytical solutions yield incorrect velocity and mass flow rate values in short micro/nanochannel flows with high compressibility and/or choked flow conditions.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDirect Simulation Monte Carlo Solution of Subsonic Flow Through Micro/Nanoscale Channels
dc.typeJournal Paper
dc.journal.volume131
dc.journal.issue9
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.3139105
dc.journal.fristpage92402
dc.identifier.eissn1528-8943
dc.keywordsChannels (Hydraulic engineering)
dc.keywordsSimulation
dc.keywordsPolishing equipment
dc.keywordsNanoscale phenomena
dc.keywordsPressure
dc.keywordsFlow (Dynamics)
dc.keywordsSubsonic flow
dc.keywordsTemperature
dc.keywordsMach number
dc.keywordsBoundary-value problems AND Heat flux
dc.treeJournal of Heat Transfer:;2009:;volume( 131 ):;issue: 009
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record