Show simple item record

dc.contributor.authorBanafsheh Barabadi
dc.contributor.authorRungun Nathan
dc.contributor.authorKei-peng Jen
dc.contributor.authorQianhong Wu
dc.date.accessioned2017-05-09T00:33:35Z
dc.date.available2017-05-09T00:33:35Z
dc.date.copyrightOctober, 2009
dc.date.issued2009
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27872#101006_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/140959
dc.description.abstractIn a recent paper, (2005, “Dynamic Compression of Highly Compressible Porous Media With Application to Snow Compaction,” J. Fluid Mech., 542, pp. 281–304) developed a novel experimental and theoretical approach to investigate the dynamic lift forces generated in the rapid compression of highly compressible porous media, (e.g., snow layer), where a porous cylinder-piston apparatus was used to measure the pore air pressure generation and a consolidation theory was developed to capture the pore-pressure relaxation process. In the current study, we extend the approach of Wu et al. to various porous materials such as synthetic fibers. The previous experimental setup was completely redesigned, where an accelerometer and a displacement sensor were employed to capture the motion of the piston. The pore-pressure relaxation during the rapid compaction of the porous material was measured. The consolidation theory developed by Wu et al. was modified by introducing the damping effect from the solid phase of the porous materials. One uses Carman–Kozeny’s relationship to describe the change in the permeability as a function of compression. By comparing the theoretical results with the experimental data, we evaluated the damping effect of the soft fibers, as well as that of the pore air pressure for two different porous materials, A and B. The experimental and theoretical approach presented herein has provided an important methodology in quantifying the contributions of different forces in the lift generation inside porous media and is an extension of the previous studies done by Wu et al.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleOn the Characterization of Lifting Forces During the Rapid Compaction of Deformable Porous Media
dc.typeJournal Paper
dc.journal.volume131
dc.journal.issue10
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.3167543
dc.journal.fristpage101006
dc.identifier.eissn1528-8943
dc.keywordsForce
dc.keywordsPressure
dc.keywordsPermeability
dc.keywordsPorous materials
dc.keywordsFibers
dc.keywordsCompacting
dc.keywordsDamping
dc.keywordsCompression
dc.keywordsDisplacement
dc.keywordsPistons
dc.keywordsMotion AND Cylinders
dc.treeJournal of Heat Transfer:;2009:;volume( 131 ):;issue: 010
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record