Show simple item record

dc.contributor.authorChristos G. Papakonstantinou
dc.contributor.authorKonstantinos Katakalos
dc.date.accessioned2017-05-09T00:32:57Z
dc.date.available2017-05-09T00:32:57Z
dc.date.copyrightApril, 2009
dc.date.issued2009
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27117#021008_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/140609
dc.description.abstractThe aim of this paper was to investigate the tensile and flexural properties of hybrid laminates made with titanium sheets and high modulus carbon fiber composites. Grade II titanium was used, which exhibits great high-temperature performance and creep resistance, low weight, and high strength. An inorganic fireproof matrix, known as geopolymer, was used to fabricate the high modulus carbon fiber composites. Previous studies have shown that these composites are strong, durable, lightweight, and can exhibit excellent performance up to 400°C. In the present study, a number of specimens were tested in uniaxial tension and four-point bending after exposure at elevated temperatures. The results indicate that the addition of carbon fibers can reduce the weight and increase the stiffness of the pure titanium. Moreover, the hybrid laminates are stronger and stiffer than the sum of the individual strengths and stiffnesses of the parent materials. An important finding is that the interlaminar bond is strong, and as a result no delamination failures were observed.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleMechanical Behavior of High Temperature Hybrid Carbon Fiber/Titanium Laminates
dc.typeJournal Paper
dc.journal.volume131
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3030879
dc.journal.fristpage21008
dc.identifier.eissn1528-8889
dc.keywordsLaminates
dc.keywordsCarbon fibers
dc.keywordsStress
dc.keywordsTemperature
dc.keywordsTitanium
dc.keywordsHigh temperature
dc.keywordsComposite materials
dc.keywordsTension AND Stiffness
dc.treeJournal of Engineering Materials and Technology:;2009:;volume( 131 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record