Show simple item record

dc.contributor.authorKedar Kirane
dc.contributor.authorSomnath Ghosh
dc.contributor.authorMike Groeber
dc.contributor.authorAmit Bhattacharjee
dc.date.accessioned2017-05-09T00:32:56Z
dc.date.available2017-05-09T00:32:56Z
dc.date.copyrightApril, 2009
dc.date.issued2009
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27117#021003_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/140604
dc.description.abstractA microstructure sensitive criterion for dwell fatigue crack initiation in polycrystalline alloy Ti-6242 is proposed in this paper. Local stress peaks due to load shedding from time dependent plastic deformation fields in neighboring grains are held responsible for crack initiation in dwell fatigue. An accurately calibrated and experimentally validated crystal plasticity finite element (FE) model is employed for predicting slip system level stresses and strains. Vital microstructural features related to the grain morphology and crystallographic orientations are accounted for in the FE model by construction of microstructures that are statistically equivalent to those observed in orientation imaging microscopy scans. The output of the finite element method model is used to evaluate the crack initiation condition in the postprocessing stage. The functional form of the criterion is motivated from the similarities in the stress fields and crack evolution criteria ahead of a crack tip and dislocation pileup. The criterion is calibrated and validated by using experimental data obtained from ultrasonic crack monitoring techniques. It is then used to predict the variation in dwell fatigue lifetime for critical microstructural conditions. The studies are extended to field experiments on β forged Ti-6242. Macroscopic aspects of loading are explored for their effect on dwell fatigue life of Ti-6242.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleGrain Level Dwell Fatigue Crack Nucleation Model for Ti Alloys Using Crystal Plasticity Finite Element Analysis
dc.typeJournal Paper
dc.journal.volume131
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3078309
dc.journal.fristpage21003
dc.identifier.eissn1528-8889
dc.keywordsFatigue
dc.keywordsCrystals
dc.keywordsSimulation
dc.keywordsStress
dc.keywordsNucleation (Physics)
dc.keywordsFracture (Materials)
dc.keywordsPlasticity
dc.keywordsFinite element model
dc.keywordsFinite element analysis
dc.keywordsDislocations
dc.keywordsCycles
dc.keywordsDeformation AND Fatigue cracks
dc.treeJournal of Engineering Materials and Technology:;2009:;volume( 131 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record