Show simple item record

dc.contributor.authorS. Ismonov
dc.contributor.authorJ. C. Newman
dc.contributor.authorM. R. Hill
dc.contributor.authorM. R. Urban
dc.contributor.authorS. R. Daniewicz
dc.date.accessioned2017-05-09T00:32:54Z
dc.date.available2017-05-09T00:32:54Z
dc.date.copyrightJuly, 2009
dc.date.issued2009
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27120#031007_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/140590
dc.description.abstractA cold expansion process is used to prolong the fatigue life of a structure under cyclic loadings. The process produces a beneficial compressive residual stress zone in the hole vicinity, which retards the initiation and propagation of the crack at the hole edge. In this study, a three-dimensional finite element model of the split-sleeve cold expansion process was developed to predict the resulting residual stress field. A thin rectangular aluminum sheet with a centrally located hole was considered. A rigid mandrel and an elastic steel split sleeve were explicitly modeled with the appropriate contact elements at the interfaces between the mandrel, the sleeve, and the hole. Geometrical and material nonlinearities were included. The simulation results were compared with experimental measurements of the residual stress. The influence of friction and the prescribed boundary conditions for the sheet were studied. Differences between the split-sleeve- and the non-split-sleeve model solutions are discussed.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThree Dimensional Finite Element Analysis of a Split-Sleeve Cold Expansion Process
dc.typeJournal Paper
dc.journal.volume131
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3120392
dc.journal.fristpage31007
dc.identifier.eissn1528-8889
dc.keywordsFriction
dc.keywordsMeasurement
dc.keywordsStress
dc.keywordsFinite element analysis
dc.keywordsBoundary-value problems AND Finite element model
dc.treeJournal of Engineering Materials and Technology:;2009:;volume( 131 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record