Show simple item record

dc.contributor.authorMichel G. Darrieulat
dc.contributor.authorKhalid Zhani
dc.contributor.authorRené-Yves Fillit
dc.contributor.authorAhmed Chenaoui
dc.date.accessioned2017-05-09T00:32:54Z
dc.date.available2017-05-09T00:32:54Z
dc.date.copyrightJuly, 2009
dc.date.issued2009
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27120#031005_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/140587
dc.description.abstractExperimental techniques were applied to study the heterogeneities of deformation of metals at the mesoscopic scale (typically 100 μm in the present case). The first are fiducial carbon grids that are transferred on to the surface of the test-pieces. Here, they were used on single and polycrystals deformed in channel-die compression. They prove efficient for strains above 1. They bring out the role of the corners of the samples, which trigger bands of deformation that grow in importance as the compression goes on. They put in evidence the mesoheterogeneities that appear in the mechanical behavior of a few highly symmetric orientations such as cube. The second technique is the use of microfocused X-rays, which give the crystallographic orientation at the same scale of 100 μm and can work in the presence of the carbon grids even when there is considerable strain hardening. The gradients found in the lattice rotations are far less pronounced than the sharp localizations in the displacement field. This highlights the importance of the rotations due to the activity of the slip systems.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleMesoscopic Investigation of the Heterogeneities Induced by Channel-Die Compression
dc.typeJournal Paper
dc.journal.volume131
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3120390
dc.journal.fristpage31005
dc.identifier.eissn1528-8889
dc.keywordsDeformation
dc.keywordsX-rays
dc.keywordsChannels (Hydraulic engineering)
dc.keywordsCompression
dc.keywordsCarbon
dc.keywordsMetals AND Texture (Materials)
dc.treeJournal of Engineering Materials and Technology:;2009:;volume( 131 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record