Show simple item record

dc.contributor.authorM. Sabet
dc.contributor.authorSh. Khoddam
dc.contributor.authorA. Zarei-Hanzaki
dc.date.accessioned2017-05-09T00:32:53Z
dc.date.available2017-05-09T00:32:53Z
dc.date.copyrightOctober, 2009
dc.date.issued2009
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27122#044502_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/140582
dc.description.abstractThe twinning-induced plasticity (TWIP) phenomenon is established as the most effective mechanism to enhance the formability of the advanced high-Mn (15–30 wt %) austenitic steels (known as TWIP steels). As the formability is very sensitive to the steel microstructure, the study of their hot deformation characteristics is highly desired. The aim of the present work is to investigate the effects of strain rate on the high temperature flow behavior, dynamic recrystallization (DRX) and the microstructural evolution of a grade of TWIP steels (with 29 wt % Mn) through single hit compression testing. The hot compression tests were carried out at two different temperatures (850°C and 1150°C) applying a range of strain rates (0.001–0.1 s−1). The results indicated a greater deformation resistance at higher strain rates. The detected broad stress peaks at higher strain rates were related to the occurrence of DRX. The microstructural studies revealed that, in addition to DRX, a geometrical dynamic recrystallization occurred at 850°C. This results in a microstructure with finer equiaxed grains.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDynamic Restoration Processes in High-Mn TWIP Steels
dc.typeJournal Paper
dc.journal.volume131
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3120394
dc.journal.fristpage44502
dc.identifier.eissn1528-8889
dc.keywordsDeformation
dc.keywordsTemperature
dc.keywordsSteel
dc.keywordsRecrystallization
dc.keywordsFlow (Dynamics)
dc.keywordsStress
dc.keywordsCompression
dc.keywordsTwinning
dc.keywordsTesting AND High temperature
dc.treeJournal of Engineering Materials and Technology:;2009:;volume( 131 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record