Show simple item record

dc.contributor.authorAndrea Aginagalde
dc.contributor.authorXabier Gomez
dc.contributor.authorLander Galdos
dc.contributor.authorCarlos García
dc.date.accessioned2017-05-09T00:32:53Z
dc.date.available2017-05-09T00:32:53Z
dc.date.copyrightOctober, 2009
dc.date.issued2009
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27122#044501_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/140581
dc.description.abstractAluminum 6XXX alloys show high strength to weight ratios and are thus promising materials for today’s transport industry lightweight construction efforts. When considering both deformation and final mechanical properties, high ductility is interesting from the conformability point of view. On the other hand, high resistance is necessary in the automotive structural parts (which can be obtained through T6 precipitation heat treatment) but leads to reduced ductility. In order to increase aluminum alloys’ formability, warm forming is commonly applied. In contradiction to this, this article shows how the tensile deformation behavior of the 6082 T6 alloy is not affected by the temperature. In this work, the necessary formability values to obtain the parts are achieved, deforming the material under O annealed condition. But this strategy is focused on the formability perspective; therefore, the final mechanical properties do not achieve the necessary strength requirements. As a solution, the possibility of applying the T6 heat treatment after forming the parts (in annealed condition) is studied. A tensile characterization of the post-heat-treated specimens obtained from the deformed experimental part results in high flow stress levels, and thus, the strategy is validated. Nevertheless, the heat treatment leads to geometrical distortions in the final part, and thus, a last calibration step should be added to the forming process in order to obtain the desired shape.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleHeat Treatment Selection and Forming Strategies for 6082 Aluminum Alloy
dc.typeJournal Paper
dc.journal.volume131
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3120384
dc.journal.fristpage44501
dc.identifier.eissn1528-8889
dc.keywordsHeat
dc.keywordsTemperature
dc.keywordsAlloys
dc.keywordsAluminum alloys
dc.keywordsStress
dc.keywordsHeat treating (Metalworking)
dc.keywordsDuctility
dc.keywordsFlow (Dynamics)
dc.keywordsCalibration AND Electrical resistance
dc.treeJournal of Engineering Materials and Technology:;2009:;volume( 131 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record