Show simple item record

dc.contributor.authorG. S. Schajer
dc.contributor.authorY. An
dc.date.accessioned2017-05-09T00:32:53Z
dc.date.available2017-05-09T00:32:53Z
dc.date.copyrightOctober, 2009
dc.date.issued2009
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27122#041001_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/140577
dc.description.abstractUniaxial tension and compression stress-strain curves are simultaneously evaluated from load and surface strain data measured during a bending test. The required calculations for the uniaxial results are expressed as integral equations and solved in that form using inverse methods. This approach is taken to reduce the extreme numerical sensitivity of calculations based on equations expressed in differential form. The inverse solution method presented addresses the numerical sensitivity issue by using Tikhonov regularization. The use of a priori information is explored as a means of further stabilizing the stress-strain curve evaluation. The characteristics of the inverse solution are investigated using experimental data from bending and uniaxial tests.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleInverse Calculation of Uniaxial Stress-Strain Curves From Bending Test Data
dc.typeJournal Paper
dc.journal.volume131
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3120409
dc.journal.fristpage41001
dc.identifier.eissn1528-8889
dc.keywordsStress
dc.keywordsStress-strain curves AND Tension
dc.treeJournal of Engineering Materials and Technology:;2009:;volume( 131 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record