Show simple item record

dc.contributor.authorK. S. Choi
dc.contributor.authorJ. R. Fekete
dc.contributor.authorW. N. Liu
dc.contributor.authorX. Sun
dc.contributor.authorM. A. Khaleel
dc.date.accessioned2017-05-09T00:32:52Z
dc.date.available2017-05-09T00:32:52Z
dc.date.copyrightOctober, 2009
dc.date.issued2009
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27122#041205_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/140570
dc.description.abstractAdvanced high strength steels (AHSS) are performance-based steel grades and their global material properties can be achieved with various steel chemistries and manufacturing processes, leading to various microstructures. In this paper, we investigate the influence of the manufacturing process and the resulting microstructure difference on the overall mechanical properties, as well as the local formability behaviors of AHSS. For this purpose, we first examined the basic material properties and the transformation kinetics of three different commercial transformation induced plasticity (TRIP) 800 steels under different testing temperatures. The experimental results show that the mechanical and microstructural properties of the TRIP 800 steels significantly depend on the thermomechanical processing parameters employed in making these steels. Next, we examined the local formability of two commercial dual phase (DP) 980 steels which exhibit noticeably different formability during the stamping process. Microstructure-based finite element analyses are carried out to simulate the localized deformation process with the two DP 980 microstructures, and the results suggest that the possible reason for the difference in formability lies in the morphology of the hard martensite phase in the DP microstructure. The results of this study suggest that a set of updated material acceptance and screening criteria is needed to better quantify and ensure the manufacturability of AHSS.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleInfluence of Manufacturing Processes and Microstructures on the Performance and Manufacturability of Advanced High Strength Steels
dc.typeJournal Paper
dc.journal.volume131
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3183778
dc.journal.fristpage41205
dc.identifier.eissn1528-8889
dc.keywordsSteel
dc.keywordsMetal stamping
dc.keywordsFracture (Process)
dc.keywordsManufacturing
dc.keywordsShear (Mechanics)
dc.keywordsMaterials properties
dc.keywordsDeformation AND Temperature
dc.treeJournal of Engineering Materials and Technology:;2009:;volume( 131 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record