Show simple item record

dc.contributor.authorN. R. Overman
dc.contributor.authorC. T. Overman
dc.contributor.authorH. M. Zbib
dc.contributor.authorD. F. Bahr
dc.date.accessioned2017-05-09T00:32:52Z
dc.date.available2017-05-09T00:32:52Z
dc.date.copyrightOctober, 2009
dc.date.issued2009
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27122#041203_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/140568
dc.description.abstractMultilayer thin films of CuNb, CuNi, and CuNbNi with 20 nm individual layer thicknesses were fabricated by magnetron sputtering on oxide coated silicon wafers. The mechanical properties of the films were measured using bulge testing and nanoindentation. Elastic and plastic properties were determined for freestanding films in both square and rectangular window geometries. A finite element model of the window was used to determine the yielding behavior to account for stress concentrations in the membranes. The initial yield in a pressurized membrane, on the order of 400–500 MPa, is approximately one-half of the flow stress inferred from nanoindentation hardness results between 1.9 GPa and 3.4 GPa, and is a result of microscale yielding prior to uniform deformation in these high strength systems.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleYield and Deformation in Biaxially Stressed Multilayer Metallic Thin Films
dc.typeJournal Paper
dc.journal.volume131
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3183775
dc.journal.fristpage41203
dc.identifier.eissn1528-8889
dc.keywordsDeformation
dc.keywordsStress
dc.keywordsTesting
dc.keywordsGeometry
dc.keywordsMembranes
dc.keywordsNanoindentation
dc.keywordsPressure
dc.keywordsElasticity
dc.keywordsFlow (Dynamics)
dc.keywordsPlasticity AND Metallic thin films
dc.treeJournal of Engineering Materials and Technology:;2009:;volume( 131 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record