Show simple item record

dc.contributor.authorMurari Mohon Roy
dc.date.accessioned2017-05-09T00:32:24Z
dc.date.available2017-05-09T00:32:24Z
dc.date.copyrightSeptember, 2009
dc.date.issued2009
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26563#032201_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/140349
dc.description.abstractThis study investigated the effect of fuel injection timing and injection pressure on combustion and odorous emissions in a direct injection diesel engine. Injection timings from 15 deg before top dead center (BTDC) to top dead center (TDC) and injection pressures from 20 MPa to 120 MPa were tested. In emissions, exhaust odor, irritation, aldehydes, total hydrocarbon, and hydrocarbon components are compared in different injection timings and injection pressures condition. Injection timings where main combustion takes place very close to TDC are found to show minimum odorous emissions. Moderate injection pressures (60–80 MPa) showed lower emissions including odor and irritation due to proper mixture formation. Below the injection pressure of 40 MPa, and over 80 MPa, emissions become worse. Combustion analysis is performed by taking cylinder pressures after engine warm-up for different injection timings and injection pressures and analyzing cylinder temperatures and heat release rates. Cylinder pressures and temperatures are gradually decreased when injection timings are retarded. Ignition delay becomes shortest at 5–10 deg BTDC injection timings. The peak cylinder pressure and temperature are increased with higher injection pressures. The shortest ignition delay and minimum emissions is found at around 60 MPa of injection pressure.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEffect of Fuel Injection Timing and Injection Pressure on Combustion and Odorous Emissions in DI Diesel Engines
dc.typeJournal Paper
dc.journal.volume131
dc.journal.issue3
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.3185346
dc.journal.fristpage32201
dc.identifier.eissn1528-8994
dc.keywordsPressure
dc.keywordsTemperature
dc.keywordsCombustion
dc.keywordsFuels
dc.keywordsCylinders
dc.keywordsEmissions
dc.keywordsExhaust systems
dc.keywordsDiesel engines
dc.keywordsIgnition AND Delays
dc.treeJournal of Energy Resources Technology:;2009:;volume( 131 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record