Show simple item record

dc.contributor.authorIbrahim Dincer
dc.contributor.authorMarc A. Rosen
dc.contributor.authorCalin Zamfirescu
dc.date.accessioned2017-05-09T00:32:24Z
dc.date.available2017-05-09T00:32:24Z
dc.date.copyrightSeptember, 2009
dc.date.issued2009
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26563#032001_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/140348
dc.description.abstractEnergy and exergy assessments are reported of integrated power generation using solid oxide fuel cells (SOFCs) with internal reforming and a gas turbine cycle. The gas turbine inlet temperature is fixed at 1573 K and the high-temperature turbine exhaust heats the natural gas and air inputs, and generates pressurized steam. The steam mixes at the SOFC stack inlet with natural gas to facilitate the reformation process. The integration of solid oxide fuel cells with gas turbines increases significantly the power generation efficiency relative to separate processes and reduces greatly the exergy loss due to combustion, which is the most irreversible process in the system. The other main exergy destruction is attributable to electrochemical fuel oxidation in the SOFC. The energy and exergy efficiencies of the integrated system reach 70–80%, which compares well to the efficiencies of approximately 55% typical of conventional combined-cycle power generation systems. Variations in the energy and exergy efficiencies of the integrated system with operating conditions are provided, showing, for example, that SOFC efficiency is enhanced if the fuel cell active area is augmented. The SOFC stack efficiency can be maximized by reducing the steam generation while increasing the stack size, although such measures imply a significant and nonproportional cost rise. Such measures must be implemented cautiously, as a reduction in steam generation decreases the steam/methane ratio at the anode inlet, which may increase the risk of catalyst coking. A detailed assessment of an illustrative example highlights the main results.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleExergetic Performance Analysis of a Gas Turbine Cycle Integrated With Solid Oxide Fuel Cells
dc.typeJournal Paper
dc.journal.volume131
dc.journal.issue3
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.3185348
dc.journal.fristpage32001
dc.identifier.eissn1528-8994
dc.keywordsFlow (Dynamics)
dc.keywordsExergy
dc.keywordsSolid oxide fuel cells
dc.keywordsMethane
dc.keywordsGas turbines
dc.keywordsTurbines
dc.keywordsFuel cells
dc.keywordsCycles
dc.keywordsSteam
dc.keywordsCombustion chambers AND Temperature
dc.treeJournal of Energy Resources Technology:;2009:;volume( 131 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record