Show simple item record

dc.contributor.authorKam K. Leang
dc.contributor.authorSeth Ashley
dc.contributor.authorGuy Tchoupo
dc.date.accessioned2017-05-09T00:32:15Z
dc.date.available2017-05-09T00:32:15Z
dc.date.copyrightJanuary, 2009
dc.date.issued2009
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26481#014502_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/140259
dc.description.abstractThis paper investigates the design of an iteration-based controller combined with feedback control to address the positioning error caused by hysteresis in a shape memory alloy (SMA) actuator. Without compensation, the positioning error due to hysteresis can be excessively large (greater than 20%), therefore limiting the performance of SMAs in positioning applications. An iterative controller based on the Preisach hysteresis model is used to compensate for the hysteresis. However, one of the major challenges with SMA at or near the phase-transition zones, from martensite to austenite and vice versa, is the output response is shown to be sensitive to small changes in the input. In practice, an iterative controller provides limited performance due to lack of robustness. It is demonstrated that combining a simple feedback controller with an iterative controller provides the needed robustness to enable high-precision tracking. Experimental results are presented that show maximum tracking error of 0.15% of the total displacement range—this value is approximately the noise level of the sensor measurement.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleIterative and Feedback Control for Hysteresis Compensation in SMA
dc.typeJournal Paper
dc.journal.volume131
dc.journal.issue1
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.3023131
dc.journal.fristpage14502
dc.identifier.eissn1528-9028
dc.keywordsActuators
dc.keywordsFeedback
dc.keywordsErrors
dc.keywordsControl equipment
dc.keywordsPhase transitions AND Design
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2009:;volume( 131 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record