Show simple item record

dc.contributor.authorJ. Matthew Carson
dc.contributor.authorWilliam T. Baumann
dc.contributor.authorWilliam R. Saunders
dc.date.accessioned2017-05-09T00:32:10Z
dc.date.available2017-05-09T00:32:10Z
dc.date.copyrightJuly, 2009
dc.date.issued2009
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26497#041007_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/140196
dc.description.abstractThermoacoustic instabilities in combustors have been suppressed using phase-shift algorithms pulsing an on-off actuator at the limit cycle frequency (flc) or at the subharmonics of flc. It has been suggested that control at a subharmonic rate may extend the actuator lifetime and possibly require less actuator bandwidth. This paper examines the mechanism of subharmonic control in order to clarify the principles of operation and subsequently identify potential advantages for combustion control. Theoretical and experimental arguments show that there must be a Fourier component of the subharmonic control signal at flc in order to stabilize the limit cycling behavior. It is also demonstrated that the magnitude of that Fourier component must be equivalent to the signal magnitude for a linear phase-shift controller that operates directly at flc. The concept of variable-subharmonic control is introduced whereby the actuator is pulsed at the instability frequency to initially stabilize the system and then is pulsed at a subharmonic frequency to maintain stability. These results imply that an actuator used for subharmonic control cannot be effective unless its bandwidth spans the instability frequency. The advantage of reduced cycling may still be realized but will require higher control authority to produce the same effect as an actuator pulsed at the instability frequency.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titlePulsed Control of Thermoacoustic Instabilities: Analysis and Experiment
dc.typeJournal Paper
dc.journal.volume131
dc.journal.issue4
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.3117192
dc.journal.fristpage41007
dc.identifier.eissn1528-9028
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2009:;volume( 131 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record