Show simple item record

dc.contributor.authorKunio Hasegawa
dc.contributor.authorKatsumasa Miyazaki
dc.contributor.authorIzumi Nakamura
dc.date.accessioned2017-05-09T00:30:21Z
dc.date.available2017-05-09T00:30:21Z
dc.date.copyrightFebruary, 2008
dc.date.issued2008
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28489#011404_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/139247
dc.description.abstractIt is important to assess the failure strengths for pipes with wall thinning to maintain the integrity of the piping systems and to make codification of allowable wall thinning. Full-scale fracture experiments on cyclic loading under constant internal pressure were performed for 4in. diameter straight pipes and 8in. diameter elbow pipes at ambient temperature. The experiments were low cycle fatigue under displacement controlled conditions. It is shown that a dominant failure mode under cyclic loading for straight pipes and elbows is crack initiation∕growth accompanying swelling by ratchet or buckling with crack initiation. When the thinning depth is deep, the failure mode is burst and crack growth with ratchet swelling. In addition, failure strengths were compared with the design fatigue curve of the ASME Code Sec. III. It is shown that pipes with wall thinning less than 50% of wall thickness have sufficient margins against a seismic event of the safety shutdown earthquake.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFailure Mode and Failure Strengths for Wall Thinning Straight Pipes and Elbows Subjected to Seismic Loading
dc.typeJournal Paper
dc.journal.volume130
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2826425
dc.journal.fristpage11404
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2008:;volume( 130 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record