Show simple item record

dc.contributor.authorToshimichi Fukuoka
dc.contributor.authorMasataka Nomura
dc.date.accessioned2017-05-09T00:30:20Z
dc.date.available2017-05-09T00:30:20Z
dc.date.copyrightFebruary, 2008
dc.date.issued2008
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28489#011204_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/139230
dc.description.abstractDistinctive mechanical behavior of bolted joints is caused by the helical shape of thread geometry. Recently, a number of papers have been published to elucidate the strength or loosening phenomena of bolted joints using three-dimensional finite element analysis. In most cases, mesh generations of the bolted joints are implemented with the help of commercial software. The mesh patterns so obtained are, therefore, not necessarily adequate for analyzing the stress concentration and contact pressure distributions, which are the primary concerns when designing bolted joints. In this paper, an effective mesh generation scheme is proposed, which can provide helical thread models with accurate geometry to analyze specific characteristics of stress concentrations and contact pressure distributions caused by the helical thread geometry. Using the finite element (FE) models with accurate thread geometry, it is shown how the thread root stress and contact pressure vary along the helix and at the nut loaded surface in the circumferential direction and why the second peak appears in the distribution of Mises stress at thread root. The maximum stress occurs at the bolt thread root located half a pitch from nut loaded surface, and the axial load along engaged threads shows a different distribution pattern from those obtained by axisymmetric FE analysis and elastic theory. It is found that the second peak of Mises stress around the top face of nut is due to the distinctive distribution pattern of σz.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleProposition of Helical Thread Modeling With Accurate Geometry and Finite Element Analysis
dc.typeJournal Paper
dc.journal.volume130
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2826433
dc.journal.fristpage11204
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2008:;volume( 130 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail
This item appears in the following Collection(s)

Show simple item record