Show simple item record

dc.contributor.authorM. Sen
dc.contributor.authorJ. Zhou
dc.contributor.authorJ. J. Cheng
dc.contributor.authorD. W. Murray
dc.date.accessioned2017-05-09T00:30:18Z
dc.date.available2017-05-09T00:30:18Z
dc.date.copyrightMay, 2008
dc.date.issued2008
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28493#021708_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/139222
dc.description.abstractCold bends are frequently required in energy pipelines in order to change the vertical and horizontal orientations of the pipeline route. They are produced by plastically bending a pipe joint in a cold bending machine by creating a series of uniformly spaced incremental bends. This procedure acts to reduce the moment capacity and buckling strain of the pipe, and studying the changes in pipe properties caused by cold bending is valuable in assessing the level of this strength reduction. Accordingly, the initial imperfections and material transformations of five full-scale cold bend pipes were assessed in this research program. The imperfections were measured at several locations around the circumference of the specimens, along the entire bend length. It was determined that the distribution of imperfections was similar in shape to a sine function, and their amplitude ranged from 0.3mmto1.0mm. Tension coupon tests were conducted on the intrados, extrados, and virgin materials of the specimens. It was revealed that the extrados material exhibited an increase in yield strength due to work hardening and that the intrados material demonstrated a reduction in yield strength due to the Bauschinger effect. It was established that the imperfections, and material transformations in the specimens were predominantly unaffected by the incremental-bend magnitude or spacing that was employed during the cold bending procedure.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleMechanical Properties of Cold Bend Pipes
dc.typeJournal Paper
dc.journal.volume130
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2892034
dc.journal.fristpage21708
dc.identifier.eissn1528-8978
dc.keywordsPipes
dc.keywordsTension
dc.keywordsMechanical properties AND Stress
dc.treeJournal of Pressure Vessel Technology:;2008:;volume( 130 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record