| dc.contributor.author | Y. Zhang | |
| dc.contributor.author | S. Das | |
| dc.date.accessioned | 2017-05-09T00:30:18Z | |
| dc.date.available | 2017-05-09T00:30:18Z | |
| dc.date.copyright | May, 2008 | |
| dc.date.issued | 2008 | |
| dc.identifier.issn | 0094-9930 | |
| dc.identifier.other | JPVTAS-28493#021702_1.pdf | |
| dc.identifier.uri | http://yetl.yabesh.ir/yetl/handle/yetl/139216 | |
| dc.description.abstract | This study was undertaken to investigate and understand the behavior of a wrinkled energy pipeline when subjected to sustained monotonic axial compressive deformation. This study involved both experimental and numerical investigations. Two full-scale laboratory tests with moderate and high internal pressures on X52 grade steel pipes with a diameter-to-thickness ratio of 45 show that this pipeline is extremely ductile and did not rupture under axisymmetric compressive axial deformation. However, they fail due to the excessive cross-sectional deformation and the final deformed shape looks like an accordion due to the formation of multiple wrinkles. Subsequently, a detailed parametric study using a numerical technique was undertaken to determine the failure condition and failure mode of this pipeline for various realistic internal pressures and diameter-to-thickness ratios. A nonlinear finite element method was used for the numerical study. The numerical model was validated with the data obtained from the two full-scale tests. The parametric study shows that the X52 linepipe loses its integrity due to the rupture in the pipe wall if the internal pressure is low and/or if the pipe has a small diameter-to-thickness ratio. This paper presents and discusses the results obtained both from the experimental and numerical parametric studies. | |
| dc.publisher | The American Society of Mechanical Engineers (ASME) | |
| dc.title | Failure of X52 Wrinkled Pipelines Subjected to Monotonic Axial Deformation | |
| dc.type | Journal Paper | |
| dc.journal.volume | 130 | |
| dc.journal.issue | 2 | |
| dc.journal.title | Journal of Pressure Vessel Technology | |
| dc.identifier.doi | 10.1115/1.2894294 | |
| dc.journal.fristpage | 21702 | |
| dc.identifier.eissn | 1528-8978 | |
| dc.keywords | Deformation | |
| dc.keywords | Pipelines | |
| dc.keywords | Pipes | |
| dc.keywords | Failure | |
| dc.keywords | Pressure AND Stress | |
| dc.tree | Journal of Pressure Vessel Technology:;2008:;volume( 130 ):;issue: 002 | |
| dc.contenttype | Fulltext | |