Show simple item record

dc.contributor.authorK. Shivaraj
dc.contributor.authorR. Wadhwan
dc.contributor.authorKrishnan Balasubramaniam
dc.contributor.authorC. V. Krishnamurthy
dc.date.accessioned2017-05-09T00:30:17Z
dc.date.available2017-05-09T00:30:17Z
dc.date.copyrightMay, 2008
dc.date.issued2008
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28493#021502_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/139213
dc.description.abstractA higher order cylindrically guided ultrasonic wave was used for the detection and sizing of hidden pitting-type corrosion in the hidden crevice regions (between the pipe and the pipe supports) without lifting or disturbing the structural layout arrangement of the pipelines. The higher order circumferential guided waves were generated using a piezoelectric crystal based transducer, located at the accessible top region of the pipes, in a pulse-echo mode. By studying the experimental parameters such as dispersion, particle displacement, and wavelength of the ultrasonic guided wave modes, an appropriate higher order mode was selected for excitation using an appropriately designed acrylic angle wedge that conforms to the pipe’s outer curvature. A manual pipe crawler was designed with a provision for holding the wedge, and the essential hardware such as data acquisition card, encoder, etc., was integrated with the system so that the corrosion was mapped in real time during the scanning of the pipes. The system was validated on pipes ranging from 6in.to24in. outer diameters of wall thicknesses up to 12mm, by mapping defects as small as 1.5mm diameter and 25% penetration wall thickness. A 2D finite element model using ABAQUS ® was used to understand the wave propagation in pipe wall and its interaction with pinhole-type defects.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleUltrasonic Circumferential Guided Wave for Pitting-Type Corrosion Imaging at Inaccessible Pipe-Support Locations
dc.typeJournal Paper
dc.journal.volume130
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2892031
dc.journal.fristpage21502
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2008:;volume( 130 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record