Show simple item record

dc.contributor.authorDieter Siegele
dc.contributor.authorElisabeth Keim
dc.contributor.authorGerhard Nagel
dc.date.accessioned2017-05-09T00:30:16Z
dc.date.available2017-05-09T00:30:16Z
dc.date.copyrightAugust, 2008
dc.date.issued2008
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28496#031405_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/139196
dc.description.abstractFor the introduction of the new reference temperature RTT0 of the ASME Code Cases N-629 and N-631 into the German Standard KTA 3201.2, the applicability of RTT0 was validated by the reevaluation of the existing fracture toughness database of German reactor pressure vessel. (RPV) steels including unirradiated and irradiated base materials and weld metal data. The test temperatures of the database were standardized to the reference temperature T0 of the master curve of the data sets and the database was compared with the ASME KIC-curve as adjusted by RTT0. The KIC-curve adjusted by RTT0 enveloped both the 1T-size adjusted database and also the as-measured database, corresponding to the definition of RTT0. Thus, the results also prove the validity of the KIC(RTT0)-curve for allowable flaw sizes and up to the crack length spectrum of the ASME KIC-database without size adjustment of T0. The results of both investigations confirmed the validity of RTT0 for German RPV steels. The majority of existing fracture toughness data are based on KIC-values. More recent data are (KJC) related to the issuing of ASTM E 1921 in 1997 and to the success of the master curve-based T0 approach. Therefore, the possible difference between T0 determined from KJC and from KIC was investigated with available databases for RPV steels. The comparison of T0(KJC) and T0(KIC) showed a 1:1 correlation proving the equivalence of KJC and KIC in the determination of T0.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleValidation of RTT0 for German Reactor Pressure Vessel Steels
dc.typeJournal Paper
dc.journal.volume130
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2937737
dc.journal.fristpage31405
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2008:;volume( 130 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record