Show simple item record

dc.contributor.authorC. Reichel
dc.contributor.authorK. Strohmeier
dc.date.accessioned2017-05-09T00:30:15Z
dc.date.available2017-05-09T00:30:15Z
dc.date.copyrightAugust, 2008
dc.date.issued2008
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28496#031301_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/139187
dc.description.abstractIn many technical fields, for example, in heat exchanger design, circular cylinders are involved in fluid structure interaction problems. Therefore, correct fluid forces are needed. Direct numerical simulation or large eddy simulation are too time expensive, but great errors can occur if fluid forces are evaluated with mainstream statistical turbulence models. In this paper, several models are applied to flow around a circular cylinder in the Reynolds number range from 500 up to 106. Mainly 2D simulations are performed. Additionally, calculations are performed to evaluate the influence of three dimensional modeling. The incorrect prediction of laminar to turbulent transition is identified as the main reason for the misprediction of flow forces with common statistical turbulence models. It is demonstrated that improvements are possible with available transition models. Although no grid independence in spatial direction could be achieved, the results indicate that 3D calculations may abolish remaining deviations between calculated and measured force coefficients. (Most of the data contained within this paper have been presented at the 2005 ASME PVPD Conference in Denver, Colorado. Although the title of the paper has not been changed, some newer results have been added.)
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleApplication of Models for Laminar to Turbulent Transition to Flow Around a Circular Cylinder
dc.typeJournal Paper
dc.journal.volume130
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2937765
dc.journal.fristpage31301
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2008:;volume( 130 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record