Show simple item record

dc.contributor.authorN. Li
dc.contributor.authorG. E. Widera
dc.contributor.authorZ. F. Sang
dc.date.accessioned2017-05-09T00:30:11Z
dc.date.available2017-05-09T00:30:11Z
dc.date.copyrightNovember, 2008
dc.date.issued2008
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28499#041210_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/139161
dc.description.abstractThe objective of this work is to study the plastic limit load of cylindrical vessels with different lateral angles θ under increasing internal loadings. Three full size test vessels with different structure dimensions were fabricated for testing. A three-dimensional, nonlinear, finite element numerical simulation was also performed. The approximate plastic limit load was obtained using a twice-elastic-slope criterion. The plastic deformation characteristics for the analysis model are discussed. The results show that distinct deformation characteristics occurred on the three experimental vessels. The intersection area shrank in the longitudinal section of the cylinder, while bulges appeared in the transverse section. The angle between the axis of lateral and the cylinder increased. The plastic limit loads determined by experiment and numerical simulation methods are in good agreement.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleStudy of Plastic Limit Load on Pressurized Cylinders With Lateral Nozzle
dc.typeJournal Paper
dc.journal.volume130
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2967743
dc.journal.fristpage41210
dc.identifier.eissn1528-8978
dc.keywordsStress
dc.keywordsFinite element analysis
dc.keywordsNozzles
dc.keywordsCylinders
dc.keywordsVessels
dc.keywordsPressure
dc.keywordsIntersections AND Deformation
dc.treeJournal of Pressure Vessel Technology:;2008:;volume( 130 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record