Show simple item record

dc.contributor.authorBo-ming Zhang
dc.contributor.authorWei-hua Xie
dc.contributor.authorShan-yi Du
dc.contributor.authorShu-yuan Zhao
dc.date.accessioned2017-05-09T00:29:12Z
dc.date.available2017-05-09T00:29:12Z
dc.date.copyrightMarch, 2008
dc.date.issued2008
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27833#034504_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/138599
dc.description.abstractAn experimental apparatus was designed and fabricated to measure the effective thermal conductivities and simulate the temperature and pressure history of reentry of a launch vehicle into a planetary atmosphere with a maximum temperature of 1600°C. An improved testing method was used to test the thermal conductivities of an alumina fibrous insulation at environmental pressures from 0.03Pato105Pa with the average temperature of the sample increased to 864°C and its density being 128kg∕m3. A method based on temperature difference is used to compute the in-plane effective thermal conductivity, and the result shows that the in-plane thermal conductivity along the y axis is 1.47 times that along the x axis. The influences of temperature and pressure on the contribution of three heat transfer mechanisms to the effective thermal conductivities were compared.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAn Experimental Study of Effective Thermal Conductivity of High Temperature Insulations
dc.typeJournal Paper
dc.journal.volume130
dc.journal.issue3
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.2804946
dc.journal.fristpage34504
dc.identifier.eissn1528-8943
dc.keywordsPressure
dc.keywordsTemperature
dc.keywordsThermal conductivity
dc.keywordsInsulation
dc.keywordsHigh temperature
dc.keywordsTesting AND Heat transfer
dc.treeJournal of Heat Transfer:;2008:;volume( 130 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record