Show simple item record

dc.contributor.authorMing-Shan Jeng
dc.contributor.authorDavid Song
dc.contributor.authorGang Chen
dc.contributor.authorRonggui Yang
dc.date.accessioned2017-05-09T00:29:07Z
dc.date.available2017-05-09T00:29:07Z
dc.date.copyrightApril, 2008
dc.date.issued2008
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27834#042410_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/138579
dc.description.abstractThis paper presents a Monte Carlo simulation scheme to study the phonon transport and the thermal conductivity of nanocomposites. Special attention has been paid to the implementation of periodic boundary condition in Monte Carlo simulation. The scheme is applied to study the thermal conductivity of silicon germanium (Si–Ge) nanocomposites, which are of great interest for high-efficiency thermoelectric material development. The Monte Carlo simulation was first validated by successfully reproducing the results of (two-dimensional) nanowire composites using the deterministic solution of the phonon Boltzmann transport equation reported earlier and the experimental thermal conductivity of bulk germanium, and then the validated simulation method was used to study (three-dimensional) nanoparticle composites, where Si nanoparticles are embedded in Ge host. The size effects of phonon transport in nanoparticle composites were studied, and the results show that the thermal conductivity of nanoparticle composites can be lower than that of the minimum alloy value, which is of great interest to thermoelectric energy conversion. It was also found that randomly distributed nanopaticles in nanocomposites rendered the thermal conductivity values close to that of periodic aligned patterns. We show that interfacial area per unit volume is a useful parameter to correlate the size effect of thermal conductivity in nanocomposites. The key for the thermal conductivity reduction is to have a high interface density where nanoparticle composites can have a much higher interface density than the simple 1D stacks, such as superlattices. Thus, nanocomposites further benefit the enhancement of thermoelectric performance in terms of thermal conductivity reduction. The thermal conductivity values calculated by this work qualitatively agrees with a recent experimental measurement of Si–Ge nanocomposites.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleModeling the Thermal Conductivity and Phonon Transport in Nanoparticle Composites Using Monte Carlo Simulation
dc.typeJournal Paper
dc.journal.volume130
dc.journal.issue4
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.2818765
dc.journal.fristpage42410
dc.identifier.eissn1528-8943
dc.keywordsComposite materials
dc.keywordsSimulation
dc.keywordsPhonons
dc.keywordsNanoparticles
dc.keywordsThermal conductivity
dc.keywordsNanocomposites
dc.keywordsRadiation scattering
dc.keywordsElectromagnetic scattering
dc.keywordsTemperature
dc.keywordsBoundary-value problems
dc.keywordsNanowires
dc.keywordsDensity AND Particulate matter
dc.treeJournal of Heat Transfer:;2008:;volume( 130 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record