Show simple item record

dc.contributor.authorA. Rabah
dc.contributor.authorS. Kabelac
dc.date.accessioned2017-05-09T00:29:04Z
dc.date.available2017-05-09T00:29:04Z
dc.date.copyrightJune, 2008
dc.date.issued2008
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27838#061501_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/138539
dc.description.abstractLocal heat transfer coefficients for flow boiling of pure 1,1,1,2-tetrafluoroethane (R134a) and binary mixtures of propane (R290) and R134a were measured. The experimental setup employed a vapor heated plain horizontal tube (di=10mm, do=12mm, L=500mm). The measurements covered a wide range of saturation temperatures (233≤Ts≤278K), mass fluxes (100≤ṁ≤300kg∕m2s), qualities (0≤ẋ≤1), and concentrations (0≤z̃≤0.65). In the zeotropic region of R134a/R290 mixtures, the measured local heat transfer coefficient was found to show a maximum decrease by a factor of 2 relative to that for pure R134a. At the azeotropic point (65% R290), it was found to increase by a factor of 1.2. The measured local heat transfer coefficients for both R134a and R134a/R290 were compared with a number of correlations.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFlow Boiling of R134a and R134a/Propane Mixtures at Low Saturation Temperatures Inside a Plain Horizontal Tube
dc.typeJournal Paper
dc.journal.volume130
dc.journal.issue6
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.2897345
dc.journal.fristpage61501
dc.identifier.eissn1528-8943
dc.keywordsFlow (Dynamics)
dc.keywordsTemperature
dc.keywordsBoiling
dc.keywordsMixtures
dc.keywordsHeat transfer coefficients AND Vapors
dc.treeJournal of Heat Transfer:;2008:;volume( 130 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record