Show simple item record

dc.contributor.authorY.-B. Chen
dc.contributor.authorB. J. Lee
dc.contributor.authorZ. M. Zhang
dc.date.accessioned2017-05-09T00:29:00Z
dc.date.available2017-05-09T00:29:00Z
dc.date.copyrightAugust, 2008
dc.date.issued2008
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27841#082404_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/138506
dc.description.abstractSubmicron metallic slit arrays with different geometry were designed and fabricated on silicon substrates. Their infrared radiative properties (transmittance, reflectance, and absorptance) were investigated both experimentally and theoretically. The normal transmittance of three fabricated Au slit arrays was measured at wavelengths between 2μm and 15μm using a Fourier-transform infrared spectrometer. The experimental results were compared to the values calculated from the rigorous coupled-wave analysis. The applicability of the effective medium theory for modeling radiative properties was also examined. The agreement between the measurement and modeling results demonstrates the feasibility of quantitative tuning of the radiative properties by employing periodic micro/nanostructures.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleInfrared Radiative Properties of Submicron Metallic Slit Arrays
dc.typeJournal Paper
dc.journal.volume130
dc.journal.issue8
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.2909614
dc.journal.fristpage82404
dc.identifier.eissn1528-8943
dc.keywordsSpectra (Spectroscopy)
dc.keywordsWavelength
dc.keywordsDiffraction gratings
dc.keywordsAbsorption
dc.keywordsReflectance
dc.keywordsWaves
dc.keywordsModeling
dc.keywordsNanostructures
dc.keywordsGeometry
dc.keywordsStrips
dc.keywordsFourier transforms
dc.keywordsMetals AND Polarization (Electricity)
dc.treeJournal of Heat Transfer:;2008:;volume( 130 ):;issue: 008
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record