| dc.contributor.author | Ali Siahpush | |
| dc.contributor.author | John Crepeau | |
| dc.contributor.author | James O’Brien | |
| dc.date.accessioned | 2017-05-09T00:29:00Z | |
| dc.date.available | 2017-05-09T00:29:00Z | |
| dc.date.copyright | August, 2008 | |
| dc.date.issued | 2008 | |
| dc.identifier.issn | 0022-1481 | |
| dc.identifier.other | JHTRAO-27841#082301_1.pdf | |
| dc.identifier.uri | http://yetl.yabesh.ir/yetl/handle/yetl/138502 | |
| dc.description.abstract | A detailed experimental and analytical study has been performed to evaluate how copper porous foam (CPF) enhances the heat transfer performance in a cylindrical solid/liquid phase change thermal energy storage system. The CPF used in this study had a 95% porosity and the phase change material (PCM) was 99% pure eicosane. The PCM and CPF were contained in a vertical cylinder where the temperature at its radial boundary was held constant, allowing both inward freezing and melting of the PCM. Detailed quantitative time-dependent volumetric temperature distributions and melt/freeze front motion and shape data were obtained. As the material changed phase, a thermal resistance layer built up, resulting in a reduced heat transfer rate between the surface of the container and the phase change front. In the freezing analysis, we analytically determined the effective thermal conductivity of the combined PCM/CPF system and the results compared well to the experimental values. The CPF increased the effective thermal conductivity from 0.423W∕mKto3.06W∕mK. For the melting studies, we employed a heat transfer scaling analysis to model the system and develop heat transfer correlations. The scaling analysis predictions closely matched the experimental data of the solid/liquid interface position and Nusselt number. | |
| dc.publisher | The American Society of Mechanical Engineers (ASME) | |
| dc.title | Phase Change Heat Transfer Enhancement Using Copper Porous Foam | |
| dc.type | Journal Paper | |
| dc.journal.volume | 130 | |
| dc.journal.issue | 8 | |
| dc.journal.title | Journal of Heat Transfer | |
| dc.identifier.doi | 10.1115/1.2928010 | |
| dc.journal.fristpage | 82301 | |
| dc.identifier.eissn | 1528-8943 | |
| dc.keywords | Temperature | |
| dc.keywords | Freezing | |
| dc.keywords | Heat transfer | |
| dc.keywords | Copper | |
| dc.keywords | Heat conduction | |
| dc.keywords | Melting | |
| dc.keywords | Thermal conductivity | |
| dc.keywords | Convection | |
| dc.keywords | Porosity AND Cylinders | |
| dc.tree | Journal of Heat Transfer:;2008:;volume( 130 ):;issue: 008 | |
| dc.contenttype | Fulltext | |