Show simple item record

dc.contributor.authorGiulio Lorenzini
dc.contributor.authorSimone Moretti
dc.date.accessioned2017-05-09T00:28:59Z
dc.date.available2017-05-09T00:28:59Z
dc.date.copyrightAugust, 2008
dc.date.issued2008
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27841#081801_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/138499
dc.description.abstractThis paper analyses the heat exchange behavior in systems characterized by Y-shaped fins through a numerical approach based on a CFD software. Starting from individual Y profiles, as optimized in a previous work in relation to the dimensionless conductance and to the performance parameter of efficiency, it has been here investigated the advantage of a modular use of profiles. The analysis has been performed by superimposing some dimensional constraints to make immediately comparable the results obtained in the different configurations faced. Each module considered has a number of fins depending on the angle α between the two arms of the Y profile. This number depends therefore also on the horizontal width occupied by the whole system and it is upperly limited by the value allocated to the best performing individual fin. The results showed a significant increase of the dimensionless conductance and therefore of the exchanged thermal power for those multifin configurations with low values of α. This result validates the new optimization criterion proposed.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleNumerical Heat Transfer Optimization in Modular Systems of Y-Shaped Fins
dc.typeJournal Paper
dc.journal.volume130
dc.journal.issue8
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.2927396
dc.journal.fristpage81801
dc.identifier.eissn1528-8943
dc.keywordsElectrical conductance
dc.keywordsOptimization
dc.keywordsFins
dc.keywordsHeat transfer AND Thermal energy
dc.treeJournal of Heat Transfer:;2008:;volume( 130 ):;issue: 008
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record